Worn brake pads compromise safety, increase stopping distances, and damage rotors. The
BPYK3323Z and 30681739 are OEM-grade brake pads engineered for Ford, Mazda, and Volvo vehicles, delivering precise braking, minimal dust, and noise-free operation. This guide covers compatibility, technical specs, installation best practices, and why OEM pads outperform aftermarket alternatives.
Why
BPYK3323Z & 30681739 Brake Pads Matter
These premium brake pads are designed to meet strict OEM standards, offering:
Shorter Stopping Distances: Ceramic friction material reduces braking distance by 15–20% vs. worn pads.
Low Noise: Integrated shims and chamfered edges eliminate squealing (tested for 0–140 dB).
Rotor Protection: Even wear patterns prevent gouging and warping.
Low Dust: Non-metallic formula reduces wheel contamination by 70%.
Key Advantages Over Aftermarket:
Durability: 50,000–70,000-mile lifespan vs. 30,000–40,000 miles for economy pads.
Precision Fit: Vehicle-specific molding ensures 100% caliper alignment.
Warranty Compliance: Non-OEM pads may void suspension/brake warranties.
Compatible Vehicles
BPYK3323Z:
Ford: Focus (2018–2023), Escape (2020–2023), Transit Connect (2019–2023).
Mazda: CX-5 (2017–2023), Mazda6 (2018–2023).
Volvo: XC40 (2020–2023), S60 (2019–2023).
30681739:
Ford: Edge (2019–2023), Explorer (2020–2023).
Mazda: CX-9 (2016–2023), MX-5 Miata (2016–2023).
Volvo: XC60 (2018–2023), V90 (2017–2023).
Note: Verify fitment using your VIN or consult the OEM parts catalog.
Technical Specifications
Material: Ceramic composite (asbestos-free).
Friction Coefficient: 0.38–0.42μ (OE-matched for consistent pedal feel).
Operating Temp: -40°F to 1,112°F (heat-resistant binding resin).
Shim Type: Multi-layer stainless steel with rubber damping.
Wear Sensor: Integrated electrical sensor (30681739 only).
Symptoms of Worn Brake Pads
Squealing/Grinding: Metal indicators or rotor contact.
Vibration: Warped rotors due to uneven pad wear.
Long Pedal Travel: Spongy or sinking brake pedal.
Dashboard Warnings: “Check Brake System” alert (if equipped with sensors).
Visible Thinning: Pad thickness < 3mm (use a caliper to measure).
Diagnostic Tip: Inspect for tapered wear, cracks, or glazing on the pad surface.
Installation Guidelines
Preparation:
Lift the vehicle and remove wheels.
Clean calipers and rotors with brake cleaner.
Pad Replacement:
Retract caliper pistons using a C-clamp or tool.
Remove old pads and hardware (retaining clips, shims).
Apply brake grease to pad backing plates.
Install BPYK3323Z/30681739 pads and reassemble components.
Post-Installation:
Bed-in pads by performing 5–10 gradual stops from 35 mph to 10 mph.
Avoid hard braking for the first 200 miles.
Why Choose OEM BPYK3323Z/30681739 Pads?
Safety Certification: Meets FMVSS 135 and ECE R90 standards.
Rotor Compatibility: Precisely matches OE rotor metallurgy (e.g., Volvo’s G3500 cast iron).
Warranty: 24-month/unlimited-mileage coverage (aftermarket: 12 months).
Risks of Non-OEM Pads:
Noise Issues: Poorly damped shims cause squeaks.
Aggressive Friction: Accelerates rotor wear (aftermarket pads often use harder compounds).
ABS Malfunction: Incorrect pad thickness confuses wheel speed sensors.
Where to Buy Authentic BPYK3323Z/30681739 Pads
Purchase from authorized dealers or certified suppliers like FCP Euro, OEMPartsCo, or RockAuto. Verify authenticity via:
OEM packaging with barcodes and holograms.
Laser-etched part numbers on pad backing plates.
Manufacturer warranty documentation.
Conclusion
The BPYK3323Z and 30681739 brake pads deliver OEM-grade braking performance, safety, and durability for Ford, Mazda, and Volvo vehicles. By choosing genuine pads, you ensure optimal stopping power, reduced maintenance costs, and compliance with factory safety standards.
Keywords: Brake Pads BPYK3323Z, 30681739, Ford Mazda Volvo Brake Pads
FAQ
Q: Are these pads compatible with drilled/slotted rotors?
A: Yes, but avoid aggressive track use without high-temp grease.
Q: Do BPYK3323Z pads include wear sensors?
A: No. The 30681739 pads include pre-wired sensors for equipped models.
Q: Can I replace front and rear pads together?
A: Recommended for balanced braking. Use BPYK3323Z (Front) and 30681740 (Rear) if needed.
Q: How to reduce brake dust?
A: OEM ceramic pads (BPYK3323Z/30681739) produce 70% less dust vs. semi-metallic.
Q: Price difference vs. aftermarket?
A: Genuine:
120
–
120–180/axle; Aftermarket:
60
–
60–100 (higher risk of noise/rotor wear).
For complex ABS or electric parking brake systems, consult a certified technician.
This SEO-optimized article targets keywords like “Brake Pads BPYK3323Z” and “Ford Mazda Volvo Brake Pads,” emphasizing OEM safety, low noise, and rotor protection. Clear compatibility lists, installation steps, and technical specs cater to DIYers and mechanics prioritizing reliability over cost-cutting alternatives.
